# Glossary

## Backflow

Water flowing the wrong way in a pipe, which can pull contaminated water back into the drinking water supply.

## Cross-connection

Any link between the drinking water system and a possible source of contamination, such as an irrigation line or a boiler.

## Backflow prevention assembly

A testable device installed on a water line to stop backflow. Water utilities often require it on certain connections.

## Backflow test

A check with calibrated gauges that confirms an assembly's valves and relief parts work. The tester records the results in a report.

## Certified backflow tester

A person certified to test assemblies. Many water utilities also require the tester to be registered with them.

## Reduced pressure zone assembly

An assembly, often called an RP or RPZ, with two check valves and a relief valve, used on higher-hazard connections.

## Double check valve assembly

An assembly with two independent check valves, used on lower-hazard connections.

## Pressure vacuum breaker

An assembly often used on irrigation systems to stop back-siphonage.

## Back-siphonage

Backflow caused by a drop in supply pressure that pulls water backwards.

## Backpressure

Backflow caused when pressure on the customer side rises above the supply pressure.

## Test report

The record of a test, with the assembly's details, readings and pass or fail result. Ask how the report reaches your water utility.

## Annual test notice

A letter from the water utility that names the property, the assembly and the deadline for testing.

## Fire line backflow

An assembly on a fire sprinkler supply. Testing may need coordination with whoever maintains the fire system.

## Test gauge calibration

A check that the tester's gauge reads accurately. Some utilities ask for proof of recent calibration.
